Category · 6 products

Gasket Mount Keyboards

Feel the difference the moment you type. Gasket-mounted keyboards suspend the plate on rubber or silicone gaskets inside the case — eliminating harsh bottom-out, reducing vibration, and producing a soft, bouncy, premium typing feel that plate-mounted boards simply can't replicate.

Buying guide

What gasket mount actually changes

In a tray-mount or top-mount board the switch plate is screwed hard to the case, so every keypress is a short, stiff thud. A gasket-mounted board sandwiches the plate between soft gaskets instead, so the typing surface flexes a fraction of a millimetre and the sound drops in pitch. The difference is comfort and acoustics, not speed - it will not make you faster, and it is a genuine preference rather than a marketing one. If you type for hours, you will notice it. If you only play, you may not.

Mounting styles, in order of stiffness

Tray mount is the stiffest and cheapest, with the plate sitting on the case bottom. Top mount screws the plate to the upper case, a little more flex. Gasket mount isolates the plate on silicone or PORON pads, which is the style this collection is built around. O-ring and leaf-spring mounts go further still, and they are rare here. Plate material then multiplies the effect: an aluminium plate stays firm even on gaskets, while FR4 or polycarbonate adds more give.

Sound, flex and why typists chase this

A gasket board typically sounds lower, rounder and less hollow than a hard-mounted one of the same size, because the case is no longer acting as a drum. The slight flex also spreads the impact across the finger instead of stopping it dead, which is what people mean by a 'thocky' or 'creamy' typing feel. None of this is measurable in a benchmark. It is the reason this collection exists as its own page rather than a filter.

What is actually in this range

Eight boards, mostly 75% and 65% layouts, from Ajazz, Aula, Attack Shark and VGN. The Ajazz AK820 family is the core of it - the wired AK820, the AK820 Pro, the AK820 V2 Pro and the AK820 Max Ultra - alongside the AULA F75 Pro, the Attack Shark K86 and the VGN A75. Several of them are also wireless, so gasket mount and a 2.4GHz dongle are not mutually exclusive.

Buying a gasket-mount keyboard in Egypt

Every board here is a genuine unit with 14-day cover against product defects and genuine-unit verification, payable cash on delivery in Egyptian pounds. Ships in 48h - weekends may vary. If you are choosing between this and a cheaper hard-mounted board, the honest test is how many hours a day you type.

Which one is right for you
KeyboardsThe full range, if gasket mount is not the thing you are shopping for. 75% Layout KeyboardsArrow keys and a function row in a compact footprint - the most common gasket size. Premium KeyboardsWhere gasket mount meets aluminium cases, better plates and tuned stabilisers. Wireless KeyboardsGasket mount and a 2.4GHz dongle on the same board is now the usual combination. Budget KingsIf the typing feel matters less than the price, start here instead.
Key terms, explained
Tray mount
The plate sits on the bottom of the case and is screwed down hard. Stiff, cheap to manufacture, and the source of the hollow, pingy sound on many budget boards.
Top mount
The plate is screwed to the upper case rather than the base, which adds a little flex compared with tray mount while staying firmer than a gasket board.
Plate material
The sheet the switches clip into. Aluminium is rigid and bright-sounding; FR4 and polycarbonate flex more and sound lower. The plate often changes feel as much as the mount does.
Case flex
How much the typing surface gives under a firm press. A little flex spreads the impact and deepens the sound; too much feels loose. Gasket mount is how most boards add it without going fully custom.
PORON and silicone gaskets
The pads that isolate the plate from the case. PORON is a dense foam; silicone is slightly springier. Both do the same job - they stop the plate and case from becoming one rigid drum.
Typing angle
The slope of the keywell, usually set by the case and optionally raised further with feet. A gasket board's flex is most noticeable at a moderate typing angle rather than lying flat.
Force break
A thin layer, often tape or foam, between the plate and the case that stops them ringing against each other. Many gasket boards already include it; on a hard-mounted board it is a common first mod.
Acoustic foam
Layers inside the case that fill empty volume and kill hollowness. A gasket board still benefits from it - the mount changes how the plate sits, the foam changes how the case rings.
FAQ
Will a gasket-mount keyboard make me type faster?

No. It changes comfort and sound, not input speed. Polling rate, switch actuation and your own technique decide speed. Buy gasket mount because you like how it feels under the fingers after an hour, not because it is faster.

What is the difference between gasket mount and a foam mod?

They do different jobs. Gasket mount isolates the plate from the case so the typing surface can flex. Foam fills empty volume inside the case so it does not ring. Many boards here do both, and doing only one still helps.

Does gasket mount work on a 60% as well as a 75%?

Yes. The mount is independent of the layout. Smaller boards have less plate to flex, so the effect is subtler, but the sound still drops compared with a hard-mounted 60% of the same size.

Is an aluminium plate on a gasket board a contradiction?

No. The gaskets still isolate the plate from the case, even if the plate itself is stiff. You get the deeper case sound of a gasket board with the firmer keyfeel of aluminium, which is a combination a lot of people prefer.

Can I add gasket mount to a keyboard that does not have it?

Not practically. The case has to be designed with pockets for the gaskets. What you can do to a hard-mounted board is add foam, tape the back of the circuit board, and tune the stabilisers - those three changes close a surprising amount of the gap.

Do these boards still work for gaming?

Yes. Several of them are Hall-effect boards with rapid trigger, and gasket mount does not slow a switch down. The collection is grouped this way because typists notice the mount; it is not a warning that gamers should look elsewhere.

Why do gasket boards cost more?

The case has to be tooled with gasket pockets, the gaskets themselves are an extra part, and the boards that bother with this usually also ship with better foam, better stabilisers and a better plate. You are paying for a quieter, more considered build, not for the pads alone.

What warranty and delivery do I get?

Every board is a genuine unit with 14-day cover against product defects and genuine-unit verification. Pay cash on delivery in Egyptian pounds. Ships in 48h - weekends may vary.

Explore related categories
Gaming IEMsMagnetic gaming keyboardsGaming miceGaming headsetsGame controllers